Virtual Thermal Printer

Print receipts from POS applications that support ESC/POS printing over IP. Just power on the printer and configure the IP-address and port displayed in your POS application. 

List of supported commands:
- ESC @: Initialize printer
- LF: Print and line feed
- GS !: Double-width and double-height
- ESC E: Turn emphasized mode on/off
- ESC -: Turn underline mode on/off
- ESC a: Align text (left, right and center)
- ESC i and ESC m: Partial cut
- GS B: Turn white/black reverse print mode on/off
- GS V: Cut paper (
- GS k: Print barcode (EAN8, EAN13, Code39)
- GS ( k: Print QR Code. Functions 169 & 180
- DLE EOT: Printer status (1..4)
- GS v 0: Print raster bit image

For more details on ESC/POS commands see https://reference.epson-biz.com/modules/ref_escpos/index.php?content_id=2

The following code-pages are supported:
- CP437: US ASCII
- CP850: Latin I
- CP852: Latin II
- CP858: Latin I + Euro
- CP860: Portugese
- CP863: Canadian-French
- CP865: Nordic
- CP866: Russian

Note: The content printed in the above screenshots is for illustrative purposes only. Depending on the POS system used, the output may vary. Please make sure your POS application supports ESC/POS commands before installing this application.