United StatesSoftware Defined Radio Client for Icom Transceivers and your iPhone SDR-Control Mobile is a full featured iPhone App to operate your Icom Transceiver at home or from around the world without additional Hard- or Software. Important: This App requires one of the following Icom Transceivers: IC-705, IC-7610, IC-9700 or the IC-R8600 Receiver FACTS AND FEATURES: ■ Compatible to iOS 16 and newer ■ Compatible with any iPhone ■ Complete operation of your Icom Transceiver in all modes ■ Use the App local or to remote access of your Transceiver from any place without additional Hard- or Software ■ Logbook with auto logging, ADIF Im-/Export ■ UDP Log submission when using external logging software ■ Integrated full featured FT8 / FT4 Tool ■ Integrated CW Decoder ■ Integrated CW Keyer ■ DX-Cluster integration ■ Call sign lookup integrated ■ Displays Calls on Map with heading and distance information ■ And much more... WHAT YOU NEED: - An Icom IC-705, IC-7610 or IC-9700 Transceiver or IC-R8600 Receiver - The Transceiver needs to be connected to your Network (WiFi or LAN) - No USB cable needed or supported - An iPhone that runs at least iOS 16 Find out more here: https://ham-radio-apps.com Read the Manual: http://go-to.me/sdrcontrol-mobile-manual
Works with Xiegu X6100
Intuitive, feature-rich app. Has been very stable for me, and works fairly well with the Xiegu X6100 as it follows most of the ICOM standards supported by this app. Great for some iOS-based FT8 (including reporting to PSK Reporter, which is a nice bonus).
United StatesVery happy, couple wishes:
I’m very please with the new iPhone app, love the iPad app. It compliments my new ic-705 very well. Wish I could send an image to the unit (rather than switch to the other app), but that may not be possible. Also wishing (and hoping) an Apple Watch add on gets release! Great work!
United StatesT-Mobile
SDR control works great remotely using WiFi but won’t work on T-mobile’s cellular network is there any fix
United StatesGreat for remote operation
Right from the start the iPhone version worked perfectly. It was so intuitive and easy to use, that it took almost no time to get setup and working. To my surprise the reports on ft8 were so much better using this program than others, with no changes made to any of my equipment. I used this for remote operation from Aruba, using both WiFi and 4G cell service. Worked perfectly with no issues or disconnects at all. I had been hesitant after having remote connection issues with other programs. But this worked 100%.
United StatesWow. Just wow!!
Best in class radio controller. This works flawlessly on my ic 7610. I was skeptical at first after trying several other tools. But wow. This one is in a class of its own. Well worth the money and more. Thank you for this fine software tool. 73.
United StatesGreat for remote operation
Right from the start the iPhone version worked perfectly. It was so intuitive and easy to use, that it took almost no time to get setup and working. To my surprise the reports on ft8 were so much better using this program than others, with no changes made to any of my equipment. I used this for remote operation from Aruba, using both WiFi and 4G cell service. Worked perfectly with no issues or disconnects at all. I had been hesitant after having remote connection issues with other programs. But this worked 100%.
United StatesWorks well on ssb. But, lacking on FT8.
Works well on ssb and general RX. But, is lacking on FT8. Better off running remote desktop into pc in the shack and running WSJT-X there. Ive ran this app on iphone, ipad, and a new Macbook M3. Ive found that WSJT-X on pc connected via usb and my ios devices connected via LAN or WAN at the same time there is a huge difference. The app is always decoding the same data 6 to 12db lower than WSJT-X does. Once WSJT gets to -13 to -16 the app is already -21 or lower and missing decodes. Once WSJT-X gets below -16, this app no longer decodes. What was odd was on the Mac version i enabled alerts for a DX call i could see on WSJT-X and the app would alert the sound, but never display it. All filtering was off. Even tried it with filtering. So it appears a coding issue and threshold on when the decodes no longer display. I emailed Marcus and he basically said hes seen the same thing and it is what it is. Appears he has no desire to dig into it. So, if your looking to use it for FT8, dont. I bought a brand new Macbook Pro M3 3 days ago thinking the faster processor may help. But its not processing i can see. Its the levels in the coding of the app. Other than that, app works good. Usually when i have found bugs he has been great at emailing back and working on a fix. This time it appears as if he is saying it is what it is. Kinda disappointed. Guess i shouldnt have bought the mac or the app.
United States
◉ Re-added the missing SWR Meter selection
◉ Several FT8 Tool improvements
◉ The logbook Details screen now allows to maintain own fields like My IOTA, My Sig, my POTA ref etc.
◉ Logging with Repeater Offset now uses the correct TX frequency
◉ It is now possible to use Macro Variables such as {UTC} for Contest RST generation. This is useful for BARTG contests where the UTC time need do be added to the exchange
◉ DTMF has been improved
◉ Fixed an issue with the tuning panel
◉ A Memory panel can now be displayed on the Main screen
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the 'CONTACT DEVELOPER' feature within the app for any issue reports or questions. I will ensure it is promptly resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRESubscribe our newsletter and get useful information every week.
Publisher's Other Apps
Other Utilities Apps
Similar Apps