ProAIR MULTI ZONE

The ProAIR Multi-Zone app is used to control the ideal temperature of your ducted or floor-standing air conditioning and heating system, at any time, wherever you are. 

You can use the proAIR Multi-Zone app to run up to 20 systems and perform the following for each one: 
-	Turn the system on and off
-	Set the system's operating mode (also for internal ducted systems if you have the Tecnosystemi communications protocol) 1
-	Control the zone ambient temperature
-	Define the required zone temperature
-	Turn each individual zone on and off
-	Adjust air output for each zone outlet
-	Define the speed of a fancoil 2
-	Define zone valve opening/closing for ProAIR2 floor-standing systems
-	Schedule time slots for each zone (up to four per day)
-	Define required temperature for each time slot
-	Monitor the system operating status: the app will notify of any anomalies
-	Rename the system and the zones involved

1 free installation of the ProAIR Multi-Zone app does not include the installation of a remote control app (or other devices) for a ducted unit: the ProAIR system will control the connected system by virtue of demands from individual zones.

2 If applicable.
When you return home or enter the office, you will find the comfort you seek by using the simple adjustments that only a precise, rapid and reliable system such as ProAIR can provide: just modify the set time slot or turn the system on manually as and when required to avoid unwanted consumption and save energy 

The application is used to control the system remotely and/or directly in situ, operating the system in real time, overriding the chronothermostats in the room from the comfort of your armchair. 

The app is compatible with ProAIR systems that use the POLARIS 3X communications unit and provides a demo that operates even without a ProAIR system installed.  In this way you can check its potential when presenting it to a friend or customer.