The Buff Flash Control app was created to help photographers take control of their lighting setups directly from their phone. - KEY FEATURES - SMART REMOTE CONTROL Use the HUB remote to find Paul C. Buff, Inc. flash units in your setup. Once added to your setup, you can control the power outputs of both the flash and modeling lamp, turn them on/off directly from your phone, and save your setups for future use. LINK800WS FIRMWARE UPDATES Update the firmware of the LINK800WS Flash Unit directly from the app using the HUB remote. *Note: The Buff Flash Control app is only compatible with the Paul C. Buff, Inc. HUB remote and Paul C. Buff, Inc. flash units (AlienBees and newer). At this time this app is only capable of controlling the flash and model light outputs and saving lighting setups. Additional features are in development and will be released periodically.
Flaky
I set this up with a Buff Hub and 1 einstein strobe with no problem. Shot it a few times with that setupand it worked fine, the hub and strobe came up quickly and smoothly. Then i tried to connect the second strobe and everything stopped working, even after rebooting everything all i got was spinny wheel in the app and couldn’t trigger either strobe any more. That’s when i uninstalled this app and the $200 buff hub went back for a refund. The quest for semi-reliable wireless flash trigger continues
Great when it works!
As others have said, great concept. Unfortunately, I have this running on my iPad Pro at my fixed tethering station. I usually power on one light at a time and every time I power an additional light, I have to quit this app and relaunch it for it to find the new added light (s). Works about half the time. I work tethered in an indoor 15’x15’ space. I spend more time restarting this app and reconnecting to Capture One than I do taking photos! There is a button to discover additional Hubs, but not additional lights?
Zero stars if possible.
Every time Paul Buff updates the app, it’s nothing but firmware errors when trying to update your Hub and your Link. Every. Singe. Time. Unacceptable.
Absolutely Awful
This app is totally worthless, it doesn’t detect all of he strobes and loses connection with the strobes. And you have to re-detect the strobes when the phone comes out of Lock Screen. And the Hub trigger is equally useless, it misfires and battery life is terrible. I purchased a Raven TLC trigger which works beautifully. Come on Paul Buff you owe it to your customers to fix this disaster.
Unusable
App is practically useless. Communication drops far too often to reliably utilize the hub system. Fantastic concept, but dreadful execution so far. If this cannot be corrected then I will move on to a different lighting system. Very disappointed.
Awful
I love the concept but this app and/or the HUB often disconnect from a light or two…or more…without alerting you. On the app, the light still appears to be connected so you’ll adjust your light output a tiny bit, take a shot, no change. Adjust it a little more, take a shot, no change. Then the frustrating realization that the changes indicated in the app didn’t effect light output at all. And don’t even think about using your phone for Bluetooth ANYTHING and expect it to stay connected to the HUB. I’ve spent far too much time eliminating interference and trouble shooting. I’m done with Buff Inc. This flaky system ( the app and the fairly expensive HUB unit that is useless without the app ) destroys the flow of a shoot.
11-23-21 Update
Update: The app now works as it should! Connects every time and stays connected. Thank you for fixing it! 2 requests for future updates: -The ability to change the power indication in the app to watt seconds rather than having to memorize a new system with the EU number. -The ability to share setups between devices. Previous: This app was flaky when I started using it a few months ago. I did what I could do to remove any signal interference and while that did help, the app would still struggle to find all lights every time even when standing within a few feet of them. After the most recent update it’s even worse. The app always crashes while looking for lights. Without this app, remote control of your lights with a Paul Buff HUB is impossible unless you also purchase a $200 Cybercommander. The Cyber commander does what the HUB does anyway which makes purchasing the HUB unit a complete waste of money. I’ve contacted Paul C. Buff twice about this problem and haven’t received a reply.
Bug fixes and performance improvements.
Subscribe our newsletter and get useful information every week.