WilhelmSK

WilhelmSK is a highly customizable display, monitoring and control dashboard for your boat.

WilhelmSK can connect to a Signal K server like the Signal K Node Server or a Signal K gateway like the iKommunicate.

It can also connect directly to some devices:  
  º NMEA 0183 over TCP or UDP. (from for example, Digital Yacht's Smart WLN10)
  º Any modern Navico (Lowrance, Simnet or B&G) GoFree MFDs
  º NMEA 2000 via Yacht Device's YDWG-02
  º Victron Venus GX or CCGX
  º Victron VRM

RayMarine Auto Pilot Support (via node-server or the YDWG only)
  º View or change current mode (Standby, Auto, Wind, Track)
  º View current target heading or Wind direction
  º Change target heading or Wind direction
  º Acknowledge "Turn To Waypoint'

Active Captain:
  º You can view Active Captain Points of Interest and review or comment on them.
  º Go to Settings->Appearance to show Active Captain Points of Interest on the maps.

Alarms and Notifications
  º View list of current current alarms
  º Acknowledge RayMarine "Turn To Waypoint' *
  º Push notification support *
  º Setup server side alarms *
  º Set an anchor alarm with the push of a button *

Features:
  - Fusion stereo (control zone volumes, source input, play, pause etc.)
  - Create a gauge for any value available via SignalK
  - Sophisticated anchor alarm (requires node server and signalk-anchoralarm-plugin)
  - Customize gauge display using SignalK meta.zones
  - Customize gauge range, min/max, etc.
  - Save custom gauges to node server or the cloud for use on other devices
  - Wind Angle gauges can optionaly be rotated so that they always point ot the bow of the boat, regaurless of device positioning
  - Place gauges by long pressing on a gauge and choosing a differnt one
  - Make a gauge full screen by double tapping
  - Multiple layout support. Create a differnt layout for Steaming, Sailing, Home Monitoring, etc.
  - Customize the nuber of pages and their layout
  - Manuall connection configuration synced accross devices via iCloud
  - Automatic connection selection based on current ip (usefull when Bonjour is not available and you have multiple boats)
  - Two themes, dark and light
  - Animated gauge needles
  - iPad Slideover and Split View support (Your gauge configuration can be customized for these views)
  - Connections can be configured to be refreshed manually or at a specific time interval 
  - Design your own custom gauge templates
  - Share your custom templates via Air Drop, eMail, Text, etc.
  - Edit ApplyTV or other device layouts and templates remotely using your iPhone or iPad
  - Most gauges can be configured to be digital or analog
  - Enter the SignalK path and title for any gauge to show data not supported by default
  - Displays AIS targets in the Map views
  - Configure node server plugins inside of the app
  - IP and RTSP camera display
  

* Some advanced features require signalk-server-node and special plugins installed. Setup Instructions at https://github.com/sbender9/wilhelmsk-node-server-setup