Vario Setup

Intuitive commissioning App for the modular lighting control device "instalight Vario".
Program a complete lighting application within only three steps and afford your customer a comfortable operation via the App "Vario" as well as via optional connected push-buttons:

1. Choose a colour mode: RGB, RGBW, Tunable White, Unicolor (or combinations)
2. Choose an operation profile for the assignment of push-buttons
3. Choose your customers favourites from a set of professionally pre-programmed light sequences, and provide them with the pre-defined touch operating areas.

Main features:
- Control of luminaires via protocol USITT DMX512-A
   (512 channels RGB, RGBW or TW with 40 frames/s)
- Dimming of luminaires with DALI
   (up to 2x64 devices via 2x DALI dt6 broadcast)
- Control of Tunable White with DALI
   (up to 2x64 devices via 2x DALI dt8 Tunable White 
   or up to 2x32 devices via 2x DALI dt6 addressed)
- Control of luminaires via protocol LEDTRIX
   (LED linear and plane systems with 2x60 channels RGB, RGBW or TW)
- Control of LED applications via universal PWM interface
   (4 PWM channels with up to 90 W each)
- Integration of up to eight push-buttons via optional binary module inside of the control device
- Communication with the control device via WiFi or LAN
- Combination of DMX or LEDTRIX with DALI or PWM offers control of ambient- and general lighting
- Locking the App using password access

Additional note:
- Requires control device „instalight Vario“ (see www.insta.de/vario)
- Operation of the control device via separate App "Vario" (free)