Walk+ Stand out in the walking at night.

"Walk+" improves the safety of night walking and running.
If you are walking and running at night,
 - The app start-up, and turn on the light.
 - Put the iPhone in a pocket or armband.
iPhone’s light flashes according to the motion, you can appeal to your presence.
FlashLights on / off brightness and lighting time can be adjusted to your liking.
There is also a function of the simple pedometer.
Pedometer, if motion coprocessor cell sor is available it will use the coprocessor.
Otherwise, it will have to count the number of steps by using an acceleration sensor.
Distance, if motion coprocessor cell sor is available acquired from coprocessor,
Otherwise, it is calculated by multiplying the number of steps in stride based on the height that you enter in the app (height × 0.45).
In the pedometer, it is possible to set the target for any number of steps / distance / elapsed time. To set the target value, select the object to open the target setting screen, enter the target value by tapping the label. Notify by voice Once you reach the target number of steps / distance / time elapsed.
The measured number of steps / distance / elapsed time can be recorded in the calendar of iOS standard.
Since the app utilizes the iPhone's proximity sensor, toward the screen on the inside it is possible to hide the screen when placed in a pocket or arm band, you can reduce the consumption of battery.

App, there is a limit to the operation in the background. Please use at the foreground.

Function
· Light flashes according to the movement (brightness / lighting time is adjustable). *
· Pedometer (step count / distance / elapsed time). **
· Pedometer (step count / distance / elapsed time) in the can set the target value, notification by voice when it reaches the target value. *
· Record pedometer data (step count / distance / elapsed time) to standard calendar of iOS.
* It does not work in the background
** Models equipped with motion co-processor can operate in the background