BMPRO’s Odyssey Caravan Power Management System is a complete power management and monitoring solution.
The Odyssey system takes the guess work out of understanding what is going on with your caravan with a simple easy to use interface on the wall of your caravan or on your own phone
- Gives you the freedom to operate onboard features including lights, slide-out and water tanks, all from the sleek built-in monitor.
- Power Management that enable operating from 240V AC power supply, the tow vehicle’s 12V auxiliary supply and solar panels to charge the caravan’s battery and power required loads
- Provides full visibility and control of the caravan’s battery system including battery status, power consumption and available charge sources
- Employs intelligent algorithms to charge the caravan’s battery, ensuring optimal battery health across multiple battery types
- Protects your investment in batteries - automatically enters battery preservation mode to conserve remaining battery power until you’re ready and able to charge
- Is BMPRO SmartConnect ready (for 2020 models onwards) – allows to connect multiple Bluetooth sensors, such as up to 4 temperature sensors (SmartTemp), two gas bottle level monitors (SmartSense) and up to 4 tyre pressure monitors (SmartPressure).
Way to basic needs to tell you how many AH you have left in your batteries not just how many hours as the hours change all the timewith the fridge cutting in and out or turning a light on or off or anything being turned on or off for that matter if how hard is it to have a basic amps in and amps out then how many are left in you battery
Disappointing. Can't change the time, interfers with setting and no option to reset the app. Wouldn't recomment it, better off using manual controls.
Rubbish gear. Manuf installed BMPro gear; BMPlus35 II HA + OdysseyLink104 + RV View2. We added the shunt later. After 7 months of constant travel absolutely sick of this gear. Requires constant reset as no connection with RV view or Odyssey app. App takes ages to connect & most times requires me to restart multiple times before it connects with OdysseyLink or I have to reset BMPlus - then all the charge state figures are incorrect. If I had my time over BMPro would be in the bin
Decent app, very basic info. Absolutely needs better visuals regarding bulk, absorption, float stages as well as logs showing monthly, weekly, daily trends for consumption/charging that are standard in competitive offerings.
It doesn't have a battery profile you can't change from agm to lithium
BMPRO gear is cheap junk. Odyssey screen hasn't even lasted 18 months before internal battery failing. Returned to BMPro, a large cost to repair. Decided it was cheaper in the long run to just pull out of caravan and replace with an alternative. Stick with a quality brand like Enerdrive or Victron.
On Samsung S22, load and input current are squeeze up on the right side of the screen making it unreadable. App should be able to tell me amp-hours left or percentage left, but the 10 battery bar display is pretty pathetic for 2023. At $400 for the BC300 shunt, I would expect it to bring at least the same battery monitoring a $100 Renogy shunt does, but no. You only know your battery level within 10%.
Contains new firmware for OdysseyLink104
Subscribe our newsletter and get useful information every week.