CCNA Labs Routing

CCNA Routing Labs premuim version provide 73  routing Labs , include CCNA / CCNP lesson routing protocol : EIGRP / OSPF / RIP / BGP , and IP service  : DHCP /NAT /ACL/ VRRP / HSRP / IP SLA / GLBP / PPP / NTP/ Tacacs+ / Radius / Telnet / SSH / L2 , L3 EtherChannel for PAgP and LACP ,  the following is a detailed LAB items : 

(1) IP Service 1 :
      Dynamic NAT
      Static NAT
      PAT (port address translation)
      Extended ACL
      Standard ACL
      Name ACL
      Time ACL
      IPv6 ACL(1)
      IPv6 ACL(2)

(2)IP Service 2 :
      VRRP (track on serial)
      HSRP (track on serial)
      VRRP/IP SLA (track on ethernet)
      HSRP/IP SLA (track on ethernet)
      GLBP(Gateway Load Balance Protocol)
      DHCP server
      DHCP relay
      Enable NAT on DHCP router
      DHCPv6 auto config

(3)IP Service 3 :
     DHCPv6 stateless
     DHCPv6 stateful
     PPP CHAP authentication
     PPP PAP authentication
     PPP multilink
     GRE tunnel
     NTP
     NTP authentication

(4)IP Routing 1:
     EIGRP manual summary
     EIGRP unequal cost load balance
     EIGRP passive interface 
     EIGRPv6
     EIGRP authentication
     EIGRPv6 authentication 
     EIGRP redistribution OSPF Route
     EIGRP redistribution RIP Route
     EIGRP redistribution static Route
     
(5)IP Routing 2:
    OSPF normal area
    OSPF stub area
    OSPF totally stub area
    OSPF NSSA area  
    OSPF totally NSSA area  
    OSPF virtual link
    OSPFv3 (OSPF for IPv6)
    OSPF authentication (by area)
    OSPF authentication (by interface)

(6)IP Routing 3:
    OSPF route summary on ABR
    OSPF route summary on ASBR
    OSPF redistribution RIP route
    OSPF redistribution static route
    RIP route filter
    OSPFv3 virtual link
    Policy base route
    RIPng
    Inter VLAN Routing

(7)IP Routing 4:
     BGP authentication
     BGP local preference (1) : config global
     BGP local preference (2) : config  network prefix
     BGP MED
     BGP neighbor 
     BGP neighbor use loopback interface
     BGP summary address

(8)Switch 1:
     Tacacs+ on switch
     Tacacs+ on router
     Radius on switch
     Radius on router
     Reset router
     Reset switch
     Config Telnet
     Config SSH
     Restricted IP access

(9)Switch 2:
     L2 EtherChannel PAgP
     L3 EtherChannel PAgP
     L2 EtherChannel LACP
     L3 EtherChannel LACP