OBD Fusion is an app for your car that allows you to read OBD2 vehicle data directly from your iPhone, iPod Touch, or iPad. You can clear your check engine light, create custom dashboards, read diagnostic trouble codes, estimate fuel economy, and much more! Is your check engine light on? Do you want to monitor fuel economy and usage in your vehicle? Do you want cool looking virtual dashboards on your iPhone or iPad? If so, then OBD Fusion is the app for you! OBD Fusion is used by professional mechanics, do-it-yourself mechanics, and vehicle owners who want to monitor their vehicle and daily driving habits. Drive smarter, improve your fuel economy, and keep your engine healthy! IMPORTANT NOTE: You must have a Wi-Fi ELM327 compatible adapter or compatible Bluetooth LE adapter such as Veepeak BLE/BLE+ 4.0 adapter, Carista BLE adapter, OBDLink MX+, OBDLink CX, Tonwon BLE adapter, LELink BLE adapter, Viecar BLE adapter, Lonauto adapter, Vgate iCar Bluetooth 4.0, BAST BLE adapter, Kiwi 3/4 to use this app. OBD Fusion is not compatible with generic ELM Bluetooth scan tools. Checkout additional adapters here: https://www.obdsoftware.net/software/obdfusion OBD Fusion supports all OBD2 and EOBD vehicles sold worldwide. If you're not sure whether your vehicle is OBD2 or EOBD compliant, see this page for more information: https://www.obdsoftware.net/support/knowledge-base/how-do-i-know-whether-my-vehicle-is-obd-ii-compliant/. OBD Fusion can also connect to some JOBD vehicles that don’t support standard OBD2 protocols. Electric vehicles (EVs) are not required to have OBD2 diagnostics since they are emissions exempt. If you are interested in using OBD Fusion on an EV, contact us first to inquire about support. OBD Fusion has a ton of features including: - Read and clear emissions-related trouble codes (fault codes) and your Check Engine Light (MIL) - View vital driving information on your CarPlay screen. Note that real-time gauges are not supported by CarPlay, so you can't view your OBD Fusion pages such as dashboards on CarPlay. - With optional enhanced diagnostic add-ons, you can read and clear enhanced trouble codes on other modules such as ABS, SRS, etc. and read transmission temperature. An enhanced diagnostic add-on is required for this functionality. - Real-time dashboard display with fully customizable gauges. Create your own dashboards with the gauges that you want to see. - Performance calculations for 1/4 mile and 0-60 mph track times - Fuel economy MPG (US and UK), l/100km or km/l calculation - Full diagnostic report that can be stored and shared - Real-time graphing of multiple signals - Multiple trip meters - Log data to CSV file - Create custom enhanced PIDs - Includes some built-in enhanced PIDs for Ford and GM vehicles - Display Boost pressure in real-time - Display Engine Power and Torque - Display calculated Air-to-fuel ratio - Display battery voltage - Read freeze frame data - Fully customizable units including English, Imperial, and Metric units - Over 150 supported PIDs - Display vehicle information including VIN and calibration ID - Emissions readiness for each US state. Find out if your car will pass emissions inspection. - Oxygen Sensor Results (Mode 05) - On-board Monitoring Tests (Mode 06) - In-performance Tracking Counters (Mode 09) - GPS tracking - plot vehicle parameters on a map - Integrated iCloud and Dropbox functionality - Available in English, Czech, French, Italian, Spanish and Greek - Manufacturer specific Enhanced Diagnostics are available for certain vehicles through In-App purchases. ** Continued use of GPS running in the background can dramatically decrease battery life. OBD Fusion is brought to you by OCTech, LLC, the makers of TouchScan and OBDwiz. OBD Fusion is a trademark of OCTech, LLC registered in the U.S.
UPDATE PIDS FOR CARPLAY
I absolutely love this app and saw that they recently released a firmware update for my car “2024 Mazda 3 2.5t “ Would be awesome if they could make the CarPlay PIDS more customizable 😉
Obd
Had this app for almost 8 years it always has worked good. Then recently, I had a little bug issue, but it was resolved quickly and now the app is back to working good again.
Can’t read Mach-E data
Please allow it to read Mach-E battery data. They show blank
Disappointed in CarPlay support
This review applies only to the CarPlay support in the App. While I was pleased to find the integration, I am disappointed in what can be displayed. I was hoping to see a dashboard presentation, like in the App, on CarPlay. At time of writing (28 Mar 2024) I can only see a few PIDs and cannot seem to add or change anything other than the basics of economy, engine temperature, RPM, and speed — all of which I get from the dash display of the cars I presently driver. If other PIDs can be added - such as fuel trim, manifold pressure, or ignition timing, the method to do so is not known to me. Regarding the general functionality - 5 stars. I purchased the add-in for Toyota. It provides me capability to read all the computer codes and monitor live data. Been using it for years. On one of my cars, which has an aftermarket supercharger, it is the only instrument that allows me to see the boost level (as the SC kit did not include any installable boost gauges).
Obd
Had this app for almost 8 years now and always worked great until now. It will not allow you to make or adjust anything on the dashboards unless your connected to your cars Bluetooth. I don’t want to be sitting in my car to be able to change or create dashboards it was never required before this ruins the app for me please update.
In depth features
Thoroughly impressed with what this can do, I purchased the Enhanced Diagnostics for my specific vehicle and it covers everything I needed to monitor. Really impressed with this app!
my favorite part
the report of my vehicle
Apr 25, 2024
Apr 24, 2024
Apr 23, 2024
• Added Mazda 2024 enhanced diagnostics. Some previous years require downloading new content and re-scanning for supported PIDs. • Added an option to automatically connect only when the app is started from CarPlay. • Added support for 11-bit CAN extended addressing in user-defined PIDs. • The maps page now displays a color-coded route when opening a log file. • Keep the screen on while reading diagnostic reports. • Added an option to import/export CSV logs when importing or exporting settings. • Added an option to reset the min/max indicators on radial gauges. • Added support for manually selecting the Bluetooth LE adapter. By default, OBD Fusion will automatically connect to the first Bluetooth LE adapter that it finds. You can change this on the Communication settings page and manually select a Bluetooth LE adapter to connect. • Fixed a bug in the trip electric energy economy unit conversion. • Various bug fixes and improvements.
Name
Price
Subscribe our newsletter and get useful information every week.